#paint

I just recently laid reflective vinyl on a freshly painted metal/aluminum sign for our industrial complex. About a month after finishing the sign, all the vinyl began to peel from all edges cleanly from the material. I used Engineer Grade Reflective Vinyl. I have never experienced being able to...

Hey All, We are creating some sign panels out of ACM and the customer has requested the edge match the graphics that will go on the faces. Both sides of the panel will be visible. What do you normally do to finish the edge of ACM? Prime & spray paint? Mask off the faces? What type of paint...

Hello all, I have a question about painting I hope someone can answer or give some suggestions rather, I work for an architectural sign company and we produce ALOT of photo polymer signage quantities in the thousands, when we paint them we have carts with a piece of plywood on top and the wood...

I am looking for some guidance/reassurance on a plan I have developed for a wall mural project. It is for two walls that need to be pressure washed and prepped (spot primed) then fully repainted with a new design. We are thinking that the project will take 2 weeks labor with 2 workers at $60/hr...

I am putting together a carved cedar sign for a client who wants a whitewash finish on the face of the sign. I have been told by some 'old school' sign painters to only use varnish for coating wood (that is not already sealed with paint) but I do not want the yellow tint of varnish over the...