panels

Hi all, I've been using the Summa S160D for almost 10 years. I've just realised that I've probably done something wrong. Please refer to the video below: On this video, the cutter read all the mark first then cut. My S Class will read the first set marks (left & right) and second set marks...

Hi Guys, We've just started out with a branch in California and need to find cost effective and secure way to ship sign panels (usually 48inch x 80inch) across the country. Anyone got any recommendations? costs or tips? Great forum fellas. Many thanks Greg

Okay, so my Mutoh has always come up a little short on banners on our banner setting but nothing drastic so we did not adjust. All other materials have always been spot on. Now, my vinyl prints are coming up short...the longer the print the bigger the difference and width-wise it is dead on...

Does anyone know if the Markolon SL(SinLife) poly sheet has a vinyl/sun side? I am applying a tranlucent printed vinyl graphic on this and the panels are not marked as I have seen on other type sheets.

I have a customer (friend) who just got a used portable trade show booth. It is about 10.5' long, and 7.5' high. There are vertical magnetic strips that the sign panels (booth wall) attach to the skeleton or structure of the booth. There are 4 panels 26.5" wide by 88.125" high. They look like...

Hello, so wondering if I could get some feedback on approaches people might make on this job. In the picture you will see lots of pipes coming out of the wall. We will be installing panels of graphics from ceiling to floor, and the panels won't always line up with the pipes, so that means we...

Has anyone had any problems with doing large multi paneled projects? I am finding that I am missing a small section between each panel. I even shrunk it down to about 11 inches and cut 2.5 inch panels just to check and it still misses a small piece between each panel. It is like it doesn't cut...

Hey y'all, I'm trying to sell some flat cut out letters made of our material that we recycle here. We have been successful in fabricating traffic signage, but I'm trying to expand out market. I'm thinking Neon companies could use it as a backer panel for reverse lit letters, can anyone imagine...

I am printing on PAV (permanent adhesive vinyl) an image that is 120"x84" I tiled the job thru Onyx and after laminating i noticed that the panels were not all the same length. I was supposed to get 3 panels of 40x84 instead what my machine printed was one panel 40x84, one panel 40x78.5 and...

Aluminum sponsor panels. Consisted a run of more than (30) panels for local sponsors.

refacing panels outside of dealership. After picture.

refacing panels outside of dealership. before picture.