• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

roland 300

  1. Question What are the best practices for preventing print head clogging on the Roland UV LG 300 without using white ink?

    I currently use my Roland UV LG 300 to print graphics on white vinyl, so I don't require white ink. Due to the high viscosity of white ink, I understand it needs to be used at least once a week to prevent the print head from clogging. My dealer suggested using a cleaning solution instead of...
  2. Roland VS-300i not printing yellow!?!

    Hello guys I thought maybe you could help me here :) This is what I have done to try and fix the problem. 1. Headsoak. 14 hours 2. Suringe sucking the line 3. Replaced the Captop So what do you guys think is the next step :( Huge issue right now. Thanks from Sweden!!!
  3. Roland TrueVis SG2-300 for sale

    2021 Roland TrueVis SG2-300 30"roll to roll large format printer for sale. Works great. Regular maintenance preformed. Low hours, still in current use. Can provide video of machine running. Upgrading to 54" printer & do not have the space for them both. Pick up North Florida $5,500 OBO
  4. Roland SP-300v Print Heater not working

    The printer started print poor, after looking into it, the print heater had turned to off, but the dried heat was working without problems. I have never touched the heater settings so the machine must have turned itself to off. When setting the heater back to 40c it never heated up at all. I...
  5. Roland Sp 300i head adjustment

    Hello What adjustment i need to do ?(bias) Se picture (Attached Files) Thanks
  6. Roland SP-300V Contour Cut Issues

    Any help would be appreciated. Roland SP-300V using Flexi to add contour cut lines and Versaworks (newest edition) to print and cut. When cutting out font (any fonts) it will not cut correctly. It either skips parts or doesn't meet up. I've replaced the blade, blade holder, cutting strip...
  7. Need Help Roland sp-300 will not print

    I upgraded it to a sp-300v with the number 7 dip switch.(It didn't print before I did that either)New dampers,lines,scrapers,wipers,changed print heads wont print checked fuses a1,a2 they are good.Acts like it wants to print just nothing comes out.Did a ink pull comes threw heads no issues.I...
  8. Need Help Problem with ink No Magenta or Cyan coming at all! Changed Fuse - Roland xc-540

    Hi Guys, Had an old thread however not had much luck with it. I have a xc-540 and I have no magenta or cyan what so ever I believed this to be a issue with the fuse as someone said I could have blown the fuse when I was trying to fix my 'sensor eye error' I have since ordered 3 fuses and...
  9. Need Help Roland RE-640 Printing Issue on Banners

    Hi have a huge issue this morning suspecting need a new encorder is this correct? See attached images. See images the prints jumping a lot tried it with various media still same issue. Thanks
  10. Question Roland SP-300 head fails again

    Hi. Our SP-300 printhead no.1 Black (K) is failing -again. (The machine has otherwise been a charm to operate and prints rather well.) Since the machine was new in 2005 we have changed head no.1 5 times. Last time in May 2016, and now it looks like its time again as the test print shows some...
  11. Need Help ROLAND VERSAWORKS DEVICE NOT FOUND HELP!

    Hi guys stressing out today our PC which held our RIPS etc gave in so instead of replacing the RAM it was cheaper to buy another. I managed to get versaworks from the hard drive and installed it. We currently have 3 ROLAND printers. I have managed to successfully connect two of our RE-640's...
  12. Need Help VP 300 Cyan and K not firing.

    Hello all, I have a VP300 that recently blew the servo board, I replace the servo board. After replacing servo board Cyan was overspreading and then stopped completely. Swapped the Y and M with the K and C and it did fire so I replaced the Print head board and the F2 fuse and now it still...
Top