#roland #sp300v

i recently got a roland sp300v just changed most of the parts. im having trouble finding a left pinch roller assembly. i was told the left and right are different and was told not to use a central one as a replacement for left or right

Hello All, I am fairly new to this equipment, i started printing out labels but noticed my cuts are way off the contours. Every label the cutting drifts further away and destroys my prints. Can someone walk me through how to fix this and being a newbie don't even know much about this equipment...

I recently purchased my Roland sp 300 v seems to have magenta and yellow ink dried in tubes or head. I have tried pulling through the caps with a syringe. cyan and black pull through but the magenta and yellow do not. I have done 2 power washes and replaced the caps and tried filling up with...

Hello, I am having a problem with my Roland SP-300. When I put the switch to the on position the printer turns on by itself and makes a loud pitch noise. Servo board led bulb is off, motherboard and printer head board led bulb is on. Any idea?? I checked all the wires to make sure they are fully...

Roland SP300V has new ink lines, new print heads, new solvent cap tops, new dampers, and new ink but ink will not fill lines or do a test print. I even primed the lines but still wont get anything. The pump seams to be working I can see the tubing move that is connected to the pump. Any ideas?

I have acquired a Roland SP300 that has been upgraded to an SP300v. The machine has sat unused for about 5 years. Originally when I got it the machine would not print at all, all the lines where clogged as were the print heads. I have cleaned out the lines, change the dampers, cap heads...