• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

station

  1.

    Flushing Position Adjustment for Roland VS-540i ink dripping out of left side of capping station

    I tried a flushing position adjustment in service mode but I notice there is ink now dripping out of the left side of capping station after cleanings (picture1). So when I did the flushing position adjustment it says to press the ENTER key when the arm part of cap unit starts to move which I did...
    • graphicsphere
    • Thread
    • adjustment capping drip flushing ink nozzles position roland station vs-540i
    • Replies: 5
    • Forum: Roland

  2. XC-540 Soljet III capping station lists/tilts to one side when rising.. okay? adjust?

    Hey! I was recently performing a height adjustment to the capping station and I noticed something weird that bothers me. The capping station has a slight (but noticable) tilt to it, that changes direction depending on the direction of travel. When moving down, it tilts slightly to the right...

  3. Black Ink Pouring out of pumping station S30670

    I have an Epson S36070 and black ink seems to be coming from the pumping station and running out of the back of the printer. Anyone have any idea of what might be happening or why this might happen. Any help or ideas would be greatly appreciated. Thank you, Kyle
  4.

    Moving to a bigger shop. Working on the layout...

    New location is 21' x 90' x 8'. Mainly one large room with a couple restrooms and a storage room in the back. I want to separate the front 24 feet with a wall to create the showroom/front desk area. There is no heating so I plan to install 9 baseboard heaters, two thermostats and a good...
Top