vacuum

So last week , I got the dreaded "No Service Station Current Detected" message and didn't hear the tell tale "whoosh" sound of the vacuum when the machine was purging. I have replaced the vacuum on our FB700 and this FB750 before and had no issues , they were under warranty and I got the part...

Hello, We work primarily with foamed PVC, usually cutting but in some cases routing with our Sharpcut. The routing debris adds up quickly. The shop vac provided fills up quickly -- even more so when using bags instead of the filter. Emptying the can is a horrible mess without the bags, due...

Hey y'all -- wondering if anyone has any unique tips for getting a good gasket on contour cut parts? We print a lot of CNC cut pieces. The more complex the cut, the more time it takes. More frustratingly, with interior corners / curves, it's not infrequent that, if there isn't a perfect gasket...

We've had our JFX200 up & running for well over a year and are experiencing two issues. The first is error 715 (ink heater thermistor), it comes up daily and requires a shut down and restart. We've had the service tech attempt multiple repairs and it's still an issue. They (service) are now...

I work for a shop that is preparing the purchase our first CNC machine. None of us have any previous experience with them. I think we're going to get the 4'x8' shopbot. Can anyone recommend a vacuum for the hold down system that would be sufficient for holding coroplast, pvc, maxmetal, etc...

Does anyone know of a way to cut down on the noise that the vacuum creates, it has become really annoying. I FEEL LIKE I'M GOING DEAF!!!!!!!!!!!!!!