• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

wet application

  1.

    Mysterious Blemish on Acrylic Sign

    Hi, I've just had an order for my first wall-mounted acrylic sign with stand-offs. I've reverse UV printed onto clear vinyl CMYK plus white, then wet applied that to the reverse side of the pre-cut acrylic sheet. At first, everything looked great but, after trimming the overhang from the vinyl...

  2. Need Help Avery Etchmark with new Plastic liner

    We have been using Etch-mark for years. The just changed to a new poly liner. At first we loved it, much easier to weed out with the fine detail that we are cutting. The problem is the transfer tape. The standard 4075 tape we use will not take it off the liner. I tried Clear Choice , that took...

  3. Bubbles in styrene

    I am printing on Avery 2920 and installing it onto .060 styrene. It a full digi print, and my table guy is by himself so he installed it wet "splash" The sign looked great, however the next day hundreds of air bubbles showed up making the sign unsellable. Anyone have this problem and how...

  4. weeding after wet application with masking tape

    Has anyone done weeding after wet application of vinyl on window? The masking tape can be taken off after 3-4 hours only before there is a reasonable bond of the vinyl with the substrate - only then can the weeding of the unwanted material be done from the glass. So I am wondering if the weeding...
Top