1324x issues strike yet again

[jcskikus]

I have BOTH a VJ1324 and VJ1324x, besides a VJ1617H, and have never come across this problem. I zeroed out the Life Times pump this Fall and at the same instant, it appeared to have screwed up the media sensor calibrations. Without having Chris and Eric from GRS to get in touch with regarding these printers, I'd be screwed.
I've used GRS as my dealers/techs for the past 15 years and know that Chris is very knowledgeable of the inner workings of a Mutoh. When I had the same type of issue with the adaptors on the 1617, I found out moving the card towards the front of adaptor and securing it with tape so it doesn't slide backwards did the trick.

 

[Ssignature]

PM sent

 

[Ssignature]

I have BOTH a VJ1324 and VJ1324x, besides a VJ1617H, and have never come across this problem. I zeroed out the Life Times pump this Fall and at the same instant, it appeared to have screwed up the media sensor calibrations. Without having Chris and Eric from GRS to get in touch with regarding these printers, I'd be screwed.
I've used GRS as my dealers/techs for the past 15 years and know that Chris is very knowledgeable of the inner workings of a Mutoh. When I had the same type of issue with the adaptors on the 1617, I found out moving the card towards the front of adaptor and securing it with tape so it doesn't slide backwards did the trick.

Resetting Lifetime All will screw up all kinds of things Never do that. Only the function that needs resetting. That is why I guide users through it

 

[Solventinkjet]

Not accurate.3.09 has been out since 2/18/2021

Huh. Where did you get it? I'm a dealer and the latest one they give me is 3.08!

 

[Ssignature]

Huh. Where did you get it? I'm a dealer and the latest one they give me is 3.08!

Mutohs public FTP

 

[Solventinkjet]

Mutohs public FTP

Haha. Figures. It's on the public site but not the dealer site! Thanks for letting me know!

 

[timson_ads]

if you want to unlock your vj i can help you