ACM Hole Offsets

[Notarealsignguy]

What is a good offset for punched holes in ACM? I usually put them 1.5-2". Do you adjust if they are going to be in the middle of something or just leave them where they are?
Any difference for 4 corners vs center for pole mounting?

 

[eahicks]

What is a good offset for punched holes in ACM? I usually put them 1.5-2". Do you adjust if they are going to be in the middle of something or just leave them where they are?
Any difference for 4 corners vs center for pole mounting?

For what size sign? Artwork should be designed with mounting in mind.... i.e. keep important text away from edges, allow space for screws/bolt, etc... Also depends on what it's mounted to.

 

[Notarealsignguy]

For what size sign? Artwork should be designed with mounting in mind.... i.e. keep important text away from edges, allow space for screws/bolt, etc... Also depends on what it's mounted to.

Say 24x36 and 10x14 going on a pole and going on a wall or fence. Sometimes you cant change someones design but you also cant have a hole too close to the edge.

 

[Texas_Signmaker]

Usually I put them right inside the border of the artwork... somewhere around 1.5" inside.