Another Mutoh Profile question... faded & washed out prints

[garrettdelano]

Fatcat: RGP Adobe 1998 profile was used in the print above. Floater: the ink limits are set at 100 and I can't increase them above that.

 

[Design it Graphics]

Alright, I printed with the perceptual intent and with an exported JPG (RGB) and it gave the results below. Still with the same issue now with the blue pretty off as well.

Send me an email: Brent@designitgraphics.com and I will send you my 3 primary profiles that I use.

 

[FatCat]

To print the red and blue are you using a CMYK mix or a Pantone spot color?