Any TSF-45 users want to share advice?

[tbullo]

I have a project coming up and I am thinking of using TSF-45 for a stucco or knock down kind of finish. Any tips would be great. I was wondering if a hopper gun would be best or just mitt it on and sponge/ roll for desired effect. I am trying to get kind of that Peachtree look onto signfoam. Thanks.

 

[studio 440]

I think you should hire a professional plasterer as you also have to use a special material and nylon mesh for foam, its a fiber base coat and texured top coat that is sometimes sprayed . If you use plain old stucco you will have adhesion failure if outdoors

 

[tbullo]

Thanks for the reply. But I'm looking for advice on TSF-45 only. It is a product for HDU to give it certain textures. I'm not talking about Drivit type products.

 

[Sandman]

It's a good product. Their hardcoat will also work.

 

[tbullo]

Thanks for the reply. I have some on the way to try out. I talked to Coastal today and they said mostly just try a few technics, but hopper gun sounded like the best way to go.