Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.

 


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

anyone know anything about colex flatbed cutters?

Discussion in 'Laser Cutters' started by petepaz, Jun 27, 2013.

  1. petepaz

    petepaz Major Contributor

    4,333
    81
    48
    Feb 14, 2007
    NJ/NY/PA
    anyone know anything about these cutters?
     

    Attached Files:

    Tags:
  2. poslive

    poslive Member

    41
    0
    6
    Mar 31, 2009
    Ohio
    We bought one last spring; it's a pretty solid machine. We use it mostly to cut Styrene, Sintra, foam-core, etc but have routed some acrylic, and Alumacorr too. It is well built, very easy to use and comes with everythiing you need. If you're going to use your cutter for non-stop production you might want to look at one of the bigger names but you can't really beat Colex for the price.
     
  3. poslive

    poslive Member

    41
    0
    6
    Mar 31, 2009
    Ohio
    The 5'x10' cutting table with 2 drag knives, router, oscillating knife, creasing wheel and kiss-cutting tool, PC and software ran us about $75k, give or take. Price included installation, training, and a Shop-Vac for dust collection. That was over a year ago so they may have gone up since then.

    --
    TJ
     
Loading...

Share This Page

 


Loading...