-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Arlon 6000RP Printing Issues
- Thread starter JaySea20
- Start date
Patentagosse
New Member
I'm facing similar issue here with a roll of 3M IJ180mC (the new one). Same file printed with same profile on the last feet of my previous roll of 3M IJ180cV3 comes out perfect, new one has grainy look. Basically it's the very same vinyl, just a different adhesive pattern...
Attachments
GaSouthpaw
Profane and profane accessories.
Probably putting too much ink down for the media would be my guess. Adjust your the profile accordingly.
And, if you're using their "canned" profiles- no matter what the manufacturer's claim (unless you're doing your printing under strictly controlled conditions like they are) you're most likely going to need do some tweaking.
And, if you're using their "canned" profiles- no matter what the manufacturer's claim (unless you're doing your printing under strictly controlled conditions like they are) you're most likely going to need do some tweaking.