• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Artwork & Printing Issue

A

Angela

New Member
Hello, I am having an issue with a customers logo. It is a 24" x 36" real estate sign. Some of the artwork is falling off of the sign and I can't remove it or I lose a large aspect of the sign. I can only print to 52" and with this portion of the logo overlaping I cannot seem to figure out how to place 2 of them side by side without this overlaping portion covering the other sign and vice a versa. Any help would be appericiated.
 
Rick

Rick

Certified Enneadecagon Designer
I'm a little confused, I'm thinking clipping mask might help, but can not figure out what you are talking about....
 
L

Locals Find!

New Member
Could you not just arrange the artwork to print vertically instead of horizontally? 24 + 24 is 48 and you said you can print 52 so you should have plenty of room, or am I missing something else here?
 
HaroldDesign

HaroldDesign

New Member
I've read the initial post several times, and I can't figure out what the actual question is. Angela- I think you'll get the help you need if you clear the confusion.
 
A

Angela

New Member
Unfortunately it made sense to me, sorry. Thanks so much for your rapid responses. The answer was a clipping mask but it wasn't working for me before or maybe I wasn't working before. Sorry for the lame post
 
A

Angela

New Member
Is there anyway to upload this artwork so you can see what I am talking about? Clipping the artwork worked for the first problem I was having, but I am still having a problem going to print.
 
You must log in or register to reply here.
Top