Best print setting for JV3 printer

[Awards+]

We have a JV3-160 and was just wondering what the most used / recommended print setting would be. How many passes and overprint?

Thanks

 

[SightLine]

Cannot remember offhand what we ran for fast low end use banners etc but for most vehicle wraps and things to be seen up close pretty much always ran 720x720 8 pass.

 

[artbot]

720x720 8 pass bi dual cmyk.

 

[signswi]

720x720 8 pass bi dual cmyk.

This for most anything. Small stuff (delicate registration) drop down to slow speed or go unidirectional, for cheap banners go to 4pass.

 

[iSign]

720x720 8 pass bi dual cmyk.

agreed...

but i drop to 360x540 for banners, which i think drops to 6 passes

unidirectional for fine detail or small copy

 

[ChicagoGraphics]

720x720 8 pass bi, 6 color

 

[SARTampaBay]

720x720 8 pass bi (uni if small text is involved), 360/540 for banners usually at 3 pass if we can keep the media comp dialed in.

 

[artbot]

in rasterlink pro II it also has an option called "fast print" it is available or goes gray depending on how many passes are chosen. if you give it more than the minimum, and choose "fast print" the head carriage goes into full speed.