-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Camaro factory rallye stripes
- Thread starter WOODBS
- Start date
JoshLoring
New Member
I've never installed factory ones. I have my own line or racing stripes but they still take about 4 hours to install correctly, Hate wet installs. Could wrap a car faster
scott pagan
New Member
i get to do them regularly and don't care too much for them. they are tricky to do (even with experience). i found this site had some good tutorial videos, they make it look easy. http://www.autotrimdesign.net/content.jsp?pageCode=Install-Video
these are one of the few i do wet. soak the top premask too to allow the decal to slide between the premask in the hood scoop to flat areas. like Josh said, you can almost wrap one faster. enjoy!
these are one of the few i do wet. soak the top premask too to allow the decal to slide between the premask in the hood scoop to flat areas. like Josh said, you can almost wrap one faster. enjoy!
strypguy
New Member
I've done alot of these. I don't quite follow his instructions but I can knock them out in less then an hour.
I usually start at the top and squeege that to hold the stripe in place. Then I lightly pull the decal down the hood as I squeege. The fingers pretty much completely disappear if you do this correctly.
John
I usually start at the top and squeege that to hold the stripe in place. Then I lightly pull the decal down the hood as I squeege. The fingers pretty much completely disappear if you do this correctly.
John