• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Can you tell what model this is?

P

ProWraps™

Guest
early 90's from what i can tell.. probably cost $20k!!!!!!!!!!!!
 
Sign_Boy

Sign_Boy

New Member
Upon zooming in on the tags on the left side I found this.....:Big Laugh

Can you contact the person selling it and ask?
They should be able to read those stickers.
 

Attachments

  • FC.jpg
    FC.jpg
    81.3 KB · Views: 160
T

TR Young

New Member
Gee, thanks for all the great info...:rolleyes::Big Laugh
Hey, the bidding starts at $1 and it is a city-surplus place, so I have a pretty good chance of picking it up, so I was just wondering if I could find any info on it.
 
luggnut

luggnut

New Member
i had that same plotter in 24" in the mid 90s. it was a workhorse then and i loved it. but like stated here it is so old you may not even be able to find software that will drive it. so i would check that out. sorry i don't remember the exact name except like you already know it's a graphtec. but i would try to find out if you have or could get your software to work it or else it would be useless even if they gave it to you.
 
P Wagner

P Wagner

--
That looks to be an Graphtec FC2100 series. This machine was produced in the early 1990s, and the 48 inch unit was priced at around $16,000 (!). Terrific machine, and assuming it works, it would still be supported in current sign making software. Big danger would be if it needed electronics parts, such as boards, I doubt that they would be available today.

Bob
 
T

TR Young

New Member
Bob Price said:
That looks to be an Graphtec FC2100 series. This machine was produced in the early 1990s, and the 48 inch unit was priced at around $16,000 (!). Terrific machine, and assuming it works, it would still be supported in current sign making software. Big danger would be if it needed electronics parts, such as boards, I doubt that they would be available today.
Bob
Click to expand...
Yeah, that's what I was thinking about. Well, I'll put in a max bid and see what happens. I may come away with it for $1.50, or I may hit the max, but I won't be out much if it's not working.
Thanks for that info, Bob!:thumb:
 
Sign Works

Sign Works

New Member
Wow you guys are way off, that is a FC4100 series which were sold between roughly 1999 & 2003. I purchased mine in mid 1999 and at the time was told that that model was just released, excellent cutter and is still working just fine.

Took a second look, definetly the 4100 series and not the earlier 2100 series model, I am familiar with both.
Here is an add for the FC4100 series cutters...... http://www.symbolgraphics.com/Graphtec/graphtec.htm
 
Last edited:
T

TR Young

New Member
Sign Works said:
Wow you guys are way off, that is a FC4100 series which were sold between roughly 1999 & 2003. I purchased mine in mid 1999 and at the time was told that that model was just released, excellent cutter and is still working just fine.

Took a second look, definetly the 4100 series and not the earlier 2100 series model, I am familiar with both.
Here is an add for the FC4100 series cutters...... http://www.symbolgraphics.com/Graphtec/graphtec.htm
Click to expand...
Thanks for that link. It definitely looks like the 4100 series. I am glad to know that it isn't as old as some of the posters here thought. The bidding is up to $50, so I am still well within my max bid. It ends tomorrow around 10:30 AM, so hopefully it will end up in the back of my Jeep.:cool:
 
Flame

Flame

New Member
Bob Price said:
That looks to be an Graphtec FC2100 series. This machine was produced in the early 1990s, and the 48 inch unit was priced at around $16,000 (!). Terrific machine, and assuming it works, it would still be supported in current sign making software. Big danger would be if it needed electronics parts, such as boards, I doubt that they would be available today.

Bob
Click to expand...


Wow, beat me to it.

Looks just like my first Graphtec! :toasting:
 
You must log in or register to reply here.
Top