Cant get my Artic Lam to stop beeping

[JayEverythingsImage]

I cannot get this thing to stop beeping...i have been dealing with this for 7 months and i can't take it anymore...lol. Can somebody please help me figure out why it won't stop beeping.....thanks.

 

[jiarby]

unplug it

 

[JayEverythingsImage]

unplug it

still need it to work....this is ridiculous....the noise is killing me

 

[JayEverythingsImage]

The "stop" light is on and it only has 1 speed....hella slow. The only way it will work and has worked is only pressing the foot pedal

 

[jiarby]

Sorry... I was just trying to be funny. Open the chassis, find the speaker and snip the wire...

 

[JayEverythingsImage]

Sorry... I was just trying to be funny. Open the chassis, find the speaker and snip the wire...

im about to do that...but my speed is so dang slow...i just need to find out what the problem is

 

[signage]

Did you get a manual with it, if so what does it say cause the beeping?

If not I would contact the company I bought it from and ask them what the problem is and to send me a manual!

It could be any number of things: ie: sensor out of position, something blocking sensor these are the most likely issues

 

[JayEverythingsImage]

Did you get a manual with it, if so what does it say cause the beeping?

If not I would contact the company I bought it from and ask them what the problem is and to send me a manual!

It could be any number of things: ie: sensor out of position, something blocking sensor these are the most likely issues

Yea and it says nothing on the beeping at all...ive had this problem for 7-8 months and just delt with it...now its getting old

 

[signage]

Does it show you the locations of the sensors? Have you checked them all?

 

[Kyle Blue]

I just recently had to deal with this. The problem we had was that the pin on the left side of the Feed table that goes into the chassis wasn't going in far enough. Try pulling the Feed table towards the chassis while pushing the chassis toward the Feed table. That worked for us.

 

[JayEverythingsImage]

Does it show you the locations of the sensors? Have you checked them all?

man this lam manual has nothing...and i mean nothing for sensors or anything

 

[Kyle Blue]

man this lam manual has nothing...and i mean nothing for sensors or anything

The manual is usless... Trust me.

 

[JayEverythingsImage]

I just recently had to deal with this. The problem we had was that the pin on the left side of the Feed table that goes into the chassis wasn't going in far enough. Try pulling the Feed table towards the chassis while pushing the chassis toward the Feed table. That worked for us.

Dang it...i tried this and same result....the stop button wont turn off and i can only get it to work with the pedal

 

[Kyle Blue]

Remove the Feed table and take a screw driver push in the button on the left hand side. Does it work then?

 

[JayEverythingsImage]

Remove the Feed table and take a screw driver push in the button on the left hand side. Does it work then?

U R THE MAN....THANKS....ITS FIXED..

u were right that sensor was not pushed in all the way....Thanks again...you saved my hair and my wife....lol

 

[Kyle Blue]

Your welcome, glad to help.