Hello all, Still having an issue with this. Printer is a VS300, new head, captop, drain lines, and pump. Just swapped for another new captop and lines and still same. Now that I remember when I bought this it had the same issue even before I put all the new parts in and explains why the whole cap station hinged mechanism had about 1/4" of caked on ink all over it that I tore apart and cleaned. Its leaking out of the left side of the cap and eventually builds up under the mechanism. What would cause this? Thank you for any help, we need to finally get this working, I'm hoping this might be the issue for the colors being off.
