I have no idea what you would call it but i am looking for something that will catch and roll the print up before it hits the ground. I've seen them on some graphtec plotters and others but does anyone know where i can buy a universal type of basket. I cant seem to keep my floors clean enough and on my long prints they of course hit the floor and i get a hair or some spec in between the print and laminate. Thanks for any help.
-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Catch Basket
- Thread starter K2
- Start date
phototec
New Member
Media Catch Basket
I call it, a Media Catch Basket
You can make one out of banner material or window screen material, hem the two ends with a rod pocket and use 1/2" emt conduit cut to fit your application, mount to your printer with some conduit clamps and fittings, you can find everything at HD or Lowe's.
Or use flat Aluminum bar stock and rod for your support (see photo).
If you can make a sign, you can do this.
Or you can buy one from SW for $625
http://www.signwarehouse.com/p-PLTA-CE-PG0007.html
I call it, a Media Catch Basket
You can make one out of banner material or window screen material, hem the two ends with a rod pocket and use 1/2" emt conduit cut to fit your application, mount to your printer with some conduit clamps and fittings, you can find everything at HD or Lowe's.
Or use flat Aluminum bar stock and rod for your support (see photo).
If you can make a sign, you can do this.
Or you can buy one from SW for $625
http://www.signwarehouse.com/p-PLTA-CE-PG0007.html
