When running 2.5D engraving, I have found that telling the software the stock is slightly thicker than what it is alows the bit to not start or stop on the material. In my experience this has been the main cause of artifacts on the surface of the part. I don't have that software so can't say for sure, but it looks similar to an Artcam rendering or Fusion 360 cam rendering.
It's basically artcam, except they moved all the useful functions around and really made me hate it. I still have an old copy of artcam I fire up to do such things.
We imported a vector file out of Illustrator.
We will try that. Thanks.
No...it takes longer to router a toolpath with chatter than it does a smooth one....but it'll be a lot more taxing on your computer to make the files as there is more data in the relief
Okay great! Thanks. We are going to give that a try.
If I'm not mistaken, you'll need to increase your resolution by the same factor that you scaled down to achieve a similar result on your production piece. (I could be wrong, I don't use Aspire)
I would think that too, but no, it doesn't work like that.
Makes since if it's a value like resolution, what does this value actually represent? Typically I'll see something like accuracy gauged in decimals rather than 20x.
