Curious if you came up with a solution.We are using a new Mimaki JFX200 to print directly to a red Formica laminate. We were wondering what type of cleaners can be used to clean the finished prints from dust, fingerprints etc... Are there any cleaners that work better and is anything off limits?
We've tried 70% and it was not removing greasy finger prints and we were getting swirl marks. That said, we did NOT try microfiber towels and, perhaps, if we wipe the heck out of it, maybe that would do it.Try your standard 70% Isopropyl Alcohol. We use it all the time with our stuff
Microfiber towels.....