-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Clear Vinyl for HPL26500
- Thread starter kylebrk
- Start date
ProColorGraphics
New Member
I have printed on the new 3M IJ114-10 with good luck on my L25500.. It is pretty inexpensive too. You just have to turn the heat down to keep the paper from curling since it is thinner.
Yesterday, I played a bit with my HP Latex printer.... Printed some catalog labels for myself on some material I had already, which was actually overlaminate material. What I used was:
http://www.na.averygraphics.com/pdfs/pd_sheets/pds_hp_dol_2060-2070-2080.pdf
Anyhow, I had no problems with it and my labels look great. I used a self adhesive matte finish profile and set it to print 12 passes. Ink wasn't too thin, it looked fine. The heaters did not curl or blister the material, so I was happy. No jams or head strikes, yay!
I'm not sure what you mean when you say you need to do "second surface" but maybe you mean overlaminate on top of printed material? What is the end product you are trying to make?
http://www.na.averygraphics.com/pdfs/pd_sheets/pds_hp_dol_2060-2070-2080.pdf
Anyhow, I had no problems with it and my labels look great. I used a self adhesive matte finish profile and set it to print 12 passes. Ink wasn't too thin, it looked fine. The heaters did not curl or blister the material, so I was happy. No jams or head strikes, yay!
I'm not sure what you mean when you say you need to do "second surface" but maybe you mean overlaminate on top of printed material? What is the end product you are trying to make?
kylebrk
New Member
Suz,
"Second Surface", how I mean it, is to print an image so that it appears to be on the adhesive side. It's really great for mounting an image to the under side of acrylic or on the inside of windows.
I'm working on a bid to re-brand 7 banks and each branch utilizes acrylic pieces. Does this make sense?
"Second Surface", how I mean it, is to print an image so that it appears to be on the adhesive side. It's really great for mounting an image to the under side of acrylic or on the inside of windows.
I'm working on a bid to re-brand 7 banks and each branch utilizes acrylic pieces. Does this make sense?
BIG EASY DOES IT
New Member
We use Arlon DPF 4500G Clear. It works very well though our l25500.
jayhawksigns
New Member
Using Oracal 3651 here right now with good results.