• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Critique Requested

signbrad

New Member
The original looks fine. As well as the updates. There are no major design flaws that would make this layout a "fail."

There is plenty of negative space. Margins are good. I usually look at the treatment of negative space first. It's where most layouts fail. The layout is not crowded. It can be scanned and digested in about one to one-and-a-half seconds, which is just right. Compare this to vehicle graphics that require 5 or 6 seconds or more to read. Such sign work is ineffective and wastes the client's money, and its only real purpose is to make a clueless client feel good.
Yet, no composition is perfect. There will always be flaws. Still, most tweaks are just tweaks, and not always based on serious design problems.

For example, the small letters in this layout will suffer from a degree of illegibility. A white letter on a dark background will optically grow in size. It's the irradiation illusion. It can render tight spacing harder to read on a dark background. If these are push-thru letters, illegibility will be intensified by the effect of halation. Halation is when the spaces between the letters fill with light and they may be next to impossible to read from any distance. On lighted signs, especially with dark backgrounds and white letters, letter spacing can be critical and often needs to be increased significantly for legibility. I love tight spacing. We all do. But sometimes compromise is necessary for a sign to do its job. The letter spacing of the small letters is far more important than their style (my opinion, of course). On the other hand, the small lettering is secondary copy, after all, not primary copy, and will require a closer viewing distance anyway.

A hundred different designers would give a hundred different variations. This is actually part of the beauty of sign design—the infinite variety that is possible. There are dozens of color combinations and compositions that will work well. This particular layout, with its letter style, reflects a design aesthetic that was extremely popular for a short period in history. It is, therefore, a "period" design. This is neither bad nor good. But if it was the designer's goal, he nailed it beautifully.
 

Johnny Best

Active Member
Seeing his layout I thought it was Frank Lloyd Wright's stain glass background with an Art Nouveau type style. All late 1800s.
But then later on he says they want a more modern look than what they have. And, I agree with signbrad's take on it.
 

JTBoh

I sell signage and signage accessories.
Thanks Brad for the detailed critique - appreciated.

If I'm an artist, I'm an accidental one. I took my bare minimum in classes in HS, still can't put pencil to paper worth a lick. If you would've asked me, I probably would have classified the font as "Art Deco". The background was just a simulation of hills. Honestly, there was no design intent other than "err, make it look pretty" lol. Art history is not a strong suit.

Maybe I should look into it.

I've been to 3 of FLW's buildings - Robie House, Fallingwater, and Florida Southern College - made it a point to visit. At one time I wanted to be an architect, waaay back when.
 

JTBoh

I sell signage and signage accessories.
Customer response:

"Font - would like something fancier - like the idea of the letter being lit. Can the back ground be made to look metal with some accents?
Basically the look of the indoor sign loved on your brochure in an outdoor version"

So... I'm gonna put a grey sign on a grey wall, with blue letters.
But not before I try to sell this.
 

Attachments

  • Pinnacle.jpg
    Pinnacle.jpg
    4.3 MB · Views: 244

JTBoh

I sell signage and signage accessories.
Sent her this as response, now we wait.
MAXIMUM EFFORT.

Customer,
Thanks for the feedback.
We can make the sign with a metal finish. Any cabinet that is a metal color is going to blend in with the wall. We can make it rectangular as well, and it will align with the lines in the wall.

But my biggest concern is with the lighting effect. I think that the end-user is seeing the gradient in the blue, and how the effect is cast within the letters. The letters shown in that image are no more than about 5" tall. The radius of projected light from each LED diode is about 3" at full illumination, which causes what we call "hot spots" to appear. Because the hot spots are in a line, it appears that there is a continuous line of higher illumination around the letters. This is an effect that cannot be duplicated with a bare metal cabinet.

In addition to that - the Pinnacle sign is designed for interior use - the lighting is just standard fluorescent, and not enough to wash out the blue (as opposed to sunlight). The parts you see illuminating on the sign are actually the wall itself. In order to have legibility in daytime and at night, the letters themselves would have to be blue. Below is a quick representation of that.

I can proceed with providing a full, drawn up version of this, but it's my opinion that it's not nearly as effective, legible, beautiful, or unique as the previous proof.

On the previous, we can use a metallic copper paint for the copper color, and that alone would give a very cool effect. The font can be swapped out for something less decorative, as needed.
I posted it on a design forum, prior to sending it to you, for critique - I only do this when I know I have a good design, for tweaks and advice. The comments from other designers were overwhelmingly positive - it is, or was, a good design. I know that in the end, it's up to you, the customer - but I really do think it would work well for the space, both day and night, and help break up the brute force of those walls.

Please let me know how you'd like to proceed.

Thanks,
JTBoh
Project Manager
 

Attachments

  • Capture.JPG
    Capture.JPG
    68 KB · Views: 195

Gino

Premium Subscriber
Sorry, I don't like this latest one at all for so many reasons...... and don't use copperplate.
 

equippaint

Active Member
What's the architectural style of the houses in there? In that area, I would assume late 90s early 2000s florida stucco tract homes? Shouldn't the sign match the style of the neighborhood?
 

Texas_Signmaker

Very Active Signmaker
Not that it's my business and no offense, but I'd take a different approach. I wouldn't of sent that email to the customer, instead I would of called them to explain the problem so you can instantly gauge their feedback and guide them. When you get over a paragraph on an email it's better to call.
 

JTBoh

I sell signage and signage accessories.
Shoresigns - Specific instructions from customer "We don't want to have a magnolia flower, there's like one tree in the entire development". They've had that since 03 iirc.

Texas - It's for a PM company that we've done like 100k with in the last year. They're the liason with the HOA. Good working relationship, and I can "push back" a little.
In the end, it's how well we know our customers. My normal method is to provide a detailed email, then follow up with a phone conversation. It lets me make sure I don't miss anything when speaking with them.
 
Top