Cutmaster 2

[toodark]

My Mac updated tonight and now my cutmaster2 does not work. Tried to reload but is now giving me an error saying downloaded from an undefined user and I can not reload. Anyone else have same issues? I have a graphtec 7000-100 .

 

[CES020]

I don't know if this helps or not, but is the box checked that allows things to be installed from Anywhere in your security settings? If not, try that.

 

[toodark]

thanks CES020, reloaded but cut master still does not work. Anyone try CM2 after Mac sent its latest update? By the looks CM2 is only good for OSX up to 10.8, 10.9 just came out. Is there a easy way to go back on the update?

 

[dypinc]

Looks like you will have to go back to 10.8.x until February.

http://www.graphteccorp.com/doc/Topics_Status(Win8&MacOSX10.9).pdf

 

[toodark]

Looks like you will have to go back to 10.8.x until February.

http://www.graphteccorp.com/doc/Topics_Status(Win8&MacOSX10.9).pdf

Thanks. Now to figure out how to go back to 10.8

 

[dypinc]

As long as you have backed up up your OS 10.8 partition or keep it as a separate partition you should not have any problems.

10.8.5 is just fine on my working partition and allows me to get all my work done while I have installed a clean OS 10.9.1 on a test partition a few weeks ago and have been installing software to it when I have the time but for reasons like this I am in no hurry to get it to a working partition yet.

 

[toodark]

As long as you have backed up up your OS 10.8 partition or keep it as a separate partition you should not have any problems.

10.8.5 is just fine on my working partition and allows me to get all my work done while I have installed a clean OS 10.9.1 on a test partition a few weeks ago and have been installing software to it when I have the time but for reasons like this I am in no hurry to get it to a working partition yet.

New to Mac. No I did not back it up. I just completed backup, few days to late.

 

[dypinc]

I guess you are just going to have to learn the hard way.

At minimum as long as you have another partition or computer with 10.8.x and Illustrator you can at least cut from that.

 

[toodark]

Guess I have to learn how to contour cut in Caldera