Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.

 


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Cutter paper Roland VG-640 issue

Discussion in 'Roland' started by wesker, Mar 14, 2020.

  1. wesker

    wesker New Member

    11
    0
    1
    Mar 4, 2020
    Belgium
    Hello, I have a small issue with my Roland, it does not cut the sheet.

    I specify: The machine does its job well as if it had to cut the sheet with the cutter, but the cutter does not lower. Yet everything has the air up, and I can manually move the cutter.

    Many thanks for your help!
     
    Tags:
  2. Jim Hancock

    Jim Hancock Member

    172
    23
    18
    Nov 11, 2008
    Delray Beach, Florida
    "Initialize the limit" to fix this issue.
    Front power off.
    Press left, up, and right buttons all at once and turn on the power.
    Follow the prompts.
    Note - when it says to set cutter down position, push the cutter head all the way to the other end of the printer THEN press the enter key. Power off and restart the printer. This should solve your issue.
     
  3. wesker

    wesker New Member

    11
    0
    1
    Mar 4, 2020
    Belgium
    Great that work fine, thank you !
     
Loading...

Share This Page

 


Loading...