Hello members..
I have a job to cut on our Graphtec FC3100-120. It is 80" strips and am I using 3M frosted crystal #7725-324. The problem is the material wandering/skewing a lot which gave me uneven thickness of the strips. I tried to cut on normal vinyl twice and they are perfectly OK. I suspect that the clear plastic backer of the 3M vinyl is causing the slippage. Did any of you have this problem and know of a way to get over it? Any help would be appreciated.
I have a job to cut on our Graphtec FC3100-120. It is 80" strips and am I using 3M frosted crystal #7725-324. The problem is the material wandering/skewing a lot which gave me uneven thickness of the strips. I tried to cut on normal vinyl twice and they are perfectly OK. I suspect that the clear plastic backer of the 3M vinyl is causing the slippage. Did any of you have this problem and know of a way to get over it? Any help would be appreciated.
