Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.

 


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

cutting magnetic

Discussion in 'Roland' started by petepaz, Feb 17, 2009.

  1. petepaz

    petepaz Major Contributor

    4,333
    81
    48
    Feb 14, 2007
    NJ/NY/PA
    anyone cut magnetic on their versa camm
    i have a sp300 and 540vp
    i have to cut magnetic decals i usually die cut them but i only need a few pieces
    just want to ask before i ruin the machine
     
    Tags:
  2. Bigdawg

    Bigdawg Just Me

    7,459
    133
    63
    Jun 8, 2005
    Sunny Florida
    did it once on an SP540... didn't like how it dragged so we decided it wasn't worth the risk to the machine.
     
  3. petepaz

    petepaz Major Contributor

    4,333
    81
    48
    Feb 14, 2007
    NJ/NY/PA
    that's what i figured
    thanks for the info
     
  4. David S

    David S New Member

    18
    0
    0
    Feb 4, 2009
    Cut the magnets about 80% of the way through and then tear them out. Use a 60 degree blade. Because of the weight of magnet material, to get an accurate cut, use more wheels or stay with the machine during cutting and help the magnet media feed back and forth.
     
Loading...

Share This Page

 


Loading...