Cutting master 2 problem

[PGSigns]

I just got my FC700-160 setup and installed the cutting master pro software and when I try opening it up through the launcher in it gives me an error message "Running CorelDraw not found". Any ideas?
Thanks
Jimmy

 

[Techman]

add in the visual basic module to corel.

 

[PGSigns]

Its loaded, the icons are under the launcher, and still get the error. Any other ideas.
Thanks
Jimmy

 

[CarolinaCabinet]

I had to adjust my Anti-Virus software settings to get mine to quit popping up with errors when I tried to launch.... any chance your firewall may be blocking its launch.

 

[jiarby]

I just reboot... it happens to me now and then. I suspect it is caused by a memory issue. Everyone knows how great Corel is at managing memory!

 

[PGSigns]

I have all the windows firewall turned off and the Norton incoming firewall is on. I tried a few things after changing the security level and get the same error.
Thanks
Jimmy

 

[Techman]

un hook internet,, turn off norton,, then try it.. nortonsucks

 

[Z Force]

Open Corel First

This happened to me. I usually open a Corel file directly and it does this. Try opening Corel from the start menu, then open your file once in Corel. Worked for me.....

 

[SuperSignsMP]

You can only have 1 corel window open. Then open the file in that window.
If you have more than 1 open it will give you this message everytime.

 

[thaibuddie]

I am having issues with interfacing corel 10 and cutting master, I get the following error:

Failed to load C:\Program Files|Corel|Graphics10\Programs|Scanvec403\Program|CorelCutPlugin.dll


I have checked the path and the .dll file exists.

Any help?
Thanks!

 

[PGSigns]

With 10 you need to add the visual basic module. I fixed my issue by installing service pack 2 for X3 and it now works fine.
Jimmy