Edge 2 print size

[solm96]

Can someone tell me why I can only print a max 11.8 inches wide using Omega 5

is this limited by the cutter? It sure looks as though it should be able to do at least 13 inches.

 

[Fred Weiss]

It will cut up to 13.2" but will only print up to 11.8" because of the width of the foil, which is only 12" and a small margin is needed. It is, for example, not uncommon to print at or near 11.8" and then contour cut an unprinted white outline around the print.

 

[solm96]

It will cut up to 13.2" but will only print up to 11.8" because of the width of the foil, which is only 12" and a small margin is needed. It is, for example, not uncommon to print at or near 11.8" and then contour cut an unprinted white outline around the print.

Thanks Fred,
If I would have thought a little bit, I guess I could have measured the width of the ribbon.