Engraving material question

[Graphicdetailsinc]

Hi all! We have a local client who needs room numbers routed. We have a local CNC shop that will do the work but we are having a hard time finding the material in the right color the client is asking for.

All we have to go by are colors that start with (S). Ex. 'Tanglewood S22', Khaki S16, etc.

 

[Graphicdetailsinc]

PS. The material is like a KingCore or a starboard

 

[Rick]

Is this an ADA sign?

 

[Graphicdetailsinc]

These won't be this time, but yes that is the same material they are looking for. It is a two-color with a contrasting core.

 

[jroides]

These are standard colors of SignMojo.com - They can be viewed at www.signmogo.com

 

[CES020]

Words are right in the previous post, but link is wrong, this is the link...

http://signmojo.com/sign-color

 

[Graphicdetailsinc]

We are looking to buy the sheet material. I believe SignMoJo is a fabricator.

 

[CES020]

The 2 major players in that world are Rowmark and IPI. The colors you asked about are neither of those products. The only place I've ever seen those colors listed in materials are the link provided.

 

[LB]

If the future signs are to be ADA, the core won't matter. You will have to apply a 1/32" minimum applique to meet the regulation for the tactile elements.

 

[rich_y]

I believe www.[B]johnsonplastics[/B].com has a lot of plastic sign material also check out New Hermes engraver and materials.

Rich. aka Premier Awards.

 

[Air Art Girl]

The 2 major players in that world are Rowmark and IPI. The colors you asked about are neither of those products. The only place I've ever seen those colors listed in materials are the link provided.

I checked both my color charts for IPI and Romark and those colors are not in their charts so must be some other mfgr.

 

[AzGene]

Another option would be to backpaint Rowmark ultramatte clear/matte, reverse engrave it and then paint fill your numbers.