Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.

 


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Error Message from G.A. 6.0 to Omega 3

Discussion in 'Gerber' started by markh789, Dec 11, 2009.

  1. markh789

    markh789 New Member

    5
    0
    1
    Nov 25, 2008
    Oklahoma City, OK
    We just upgraded our Sabre from G.A. 6.0 to Omega 3. When we send a file to the router we get an error message on the handheld router keyboard that says: !!!!ERROR!!! Plot Data Command. Any Ideas of what we need? Our revision level is E.6a boot ldr Rev. B.3, Thanks So Much for any help.
     
    Tags:
  2. Tony Teveris

    Tony Teveris Active Member

    Sounds like firmware but let me check first.
     
  3. Tony Teveris

    Tony Teveris Active Member

    There should be a document in the Upgrade explaining that you need to check the Rev level of your Sabre Firmware and upgrade it accordingly.

    On the Omega 3.0 DVD there should be a folder with firmware info on it and firmware itself.

    They should be able to access the Firmware Folder on the DVD, open it and then open the Sabre Folder.

    Open the "Qx" folder and follow the directions to flash the "Q.0e" (English language) firmware to the Sabre.
     
  4. markh789

    markh789 New Member

    5
    0
    1
    Nov 25, 2008
    Oklahoma City, OK
    Thanks Tony, your the best!!

    Thanks Tony, I found the firmware upgrade, and everything seems to be working properly. Best Wishes, Mark
     
Loading...

Share This Page

 


Loading...