Favorite Intermediate Vinyl/Tape Combo

[gplough]

Just curious what your favorite Vinyl/Tape combo was? I send a lot of stuff to customers to self install - small lettering/DOT Numbers etc. Typically I send them Oracal 651 with briteline tape (that I have applied via a laminator).

My only concern with what I'm currently doing is that the 651 isn't always the easiest lifting stuff.

I also like RTape AT75 which works better but the 30" rolls don't really play that well with the laminator.

Appreciate your opinions!
Greg

 

[hcardwell93]

I use RTape 4075RLA and it works great. Comes up to 60" wide rolls.

 

[ams]

For transfer tape I only use Rtape 4075RLA, it's the best in my opinion. As for cut vinyl I only use Oracal 651

 

[equippaint]

651 and 4075 here too. Flip the vinyl over and remove the backing from the vinyl rather than pulling the tape/vinyl off of the backing. We fold the paper over and slide it flat across rather than at a 45 or 90 on the 651 if that makes any sense? Otherwise the vinyl likes to stay on the backing.

 

[decalman]

651 and 951.... I don't know why I never use 751. I guess everyone hates Mr In between.

Or the...pickel in the middle.

 

[Christian @ 2CT Media]

We use alot of briteline vinyl and have recently switched to AirMask 510U with great success, seriously amazing tape.

 

[bannertime]

We stock most of the Briteline colors and use their tape for 90% of the cut vinyl work. Was a long process for finding a new "go-to" after A6 disappeared.