Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.

 


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

FC8000 Not Cutting Top Inch - Contour Cutting

Discussion in 'Graphtec' started by RoyalCask, Nov 18, 2020.

  1. RoyalCask

    RoyalCask New Member

    7
    0
    1
    Oct 23, 2020
    Scottsdale, AZ
    FC8000 Not Cutting Top Inch - Contour Cutting

    Is there a margin setting or something that restricts cutting within an inch or so of the organ point? If so, can I turn it off?

    Thanks all!
     
    Tags:
  2. WYLDGFI

    WYLDGFI Merchant Member

    1,429
    197
    63
    Oct 27, 2006
    Linden, NJ
    Maybe your pinch rollers are restricting your width?

    1. Scan the media with the pinch rollers WIDER than the media.
    2. Open the pinch and bring the pinch rollers in closer or onto the edges of the media.
    3. Hit CONTINUE or #4 on your control panel. You now have max width available to cut...but you need to be careful!!

    If you're talking about the length...say 1 inch from the lead edge of the media, thats the media eye/ scanner at the front.
     
    Last edited: Nov 18, 2020
Loading...

Share This Page

 


Loading...