Fence Mesh Vinyl

[Artworks]

Can anyone tell me which manufacturers make the the Vinyl Mesh Material for fences? Can it be printed on the Latex or is it UV only? I would like to get a roll of it and print some samples for our stores.

Thanks in advance!

 

[Andy D]

You mean mesh banner material? Everyone sells it, just make sure it comes with a protective liner
to keep the ink from messing up your printer. It can be printed UV, Latex, and Solvent.

 

[Solventinkjet]

The liner is key to keep your machine clean. Check out Arlon mesh banner.

 

[Artworks]

You mean mesh banner material? Everyone sells it, just make sure it comes with a protective liner
to keep the ink from messing up your printer. It can be printed UV, Latex, and Solvent.

I have seen the mesh vinyl from Fellers but it only specifies for 8 - 10 oz mesh. I have seen some samples of mesh that appear to be really thick mesh and that is what I was hoping to get. Something very durable.

 

[AaronSSsignsKC]

Pay attention to the whole pattern in the mesh as well as the oz some have a smaller hole pattern and catch more air but have better print quality. But some mesh like ultra flex has bigger holes and a lighter mesh can take more of a beating but does not print as well. good luck!

 

[Andy D]

I think 10oz is pretty much standard, I haven't ever seen mesh
that is quit a bit thicker than that. Also, thicker doesn't equate longer
lasting, a high quality 10 oz banner with a high strand count will outlast
a cheap 15oz banner every time. The extra weight of the thicker banner actually
works against it by tearing out the grommets.

 

[Artworks]

Good point. Which brand do you prefer?

 

[DirtyD]

NGlantz - BeMesh - Printed (2) 60" x 65' on it and turned out great - they got attached at a train-yard on a walkover type of bridge

-Customer Install-

 

[shoresigns]

We use Ultraflexx 8oz strip mesh