Flexisign Pro 7.6 install error

[toodark]

I sold my printer, Flexisign and I removed Flexisign from my computer. The buyer wants to see Flexisign work and I have tried to reload, now I am running into an error when I try to re-load. Here is a screen shot. Any ideas??

 

[toodark]

Looks like the hang up is when it is loading program/fonts

 

[Steph_Stamm]

It looks like you might be having some crazy conflict between Flexi 7.6 and 6.5. The installer says 7.6, while the error box says 6.5. You might want to try uninstalling 6.5 and then proceeding with 7.6 install. If it happens to be a bad disk or something, you can also download 7.6 from this YouSendIt link:

http://www.yousendit.com/transfer.p...311976&email=22a3c252b796f5d5cdbd6505d3857a4d

Good luck!

 

[BobbyFosson]

File sharing is not normally permitted here but seeing as this link is being supplied by a MM that happens to be the Manufacturer of the software, letting it go.

Thank you Steph for helping out.

 

[toodark]

It looks like you might be having some crazy conflict between Flexi 7.6 and 6.5. The installer says 7.6, while the error box says 6.5. You might want to try uninstalling 6.5 and then proceeding with 7.6 install. If it happens to be a bad disk or something, you can also download 7.6 from this YouSendIt link:

http://www.yousendit.com/transfer.p...311976&email=22a3c252b796f5d5cdbd6505d3857a4d

Good luck!

Thanks, that worked!!!!:U Rock:

 

[Steph_Stamm]

Woo hoo! Glad to help. Bobby, next time I will PM the link. Thanks!