Flexisign pro 7.6v2 and winodws 7 64bit

[signsbykacie]

My computer crashed and I was running windows xp 32 bit version with my flexisign pro 7.6v2, and I thought I would have to buy a new computer and go back to windows xp inorder to get my version of flexisign to work. The sales man convinced me that I could downloan xp mode and it would work. Apparently I cant get xp mode to work on my laptop because it is a sony vaio and it is not enabled in the bios and you have to rewrite the bios to fix that... (to scared to do that) I tried installing flexisign onto windows 7 to see if if would work and it seemed to install okay and everything seems to work fine untill i try to print and I get an error message that says "caught exception, error code -6"
any ideas....

 

[Stealth Ryder]

Upgrade your Flexi...

 

[RiXaX]

I couldn't get it to work with the 64 bit, but Windows 7 with the 32 bit works fine. I don't do the digital printing and find little in the newer versions of Flexi that would benefit me enough to justify the expense.

 

[SignBurst PCs]

Did you try installing XP Mode? MS removed the visualization requirement on the CPU. It has worked on every PC that I have tried. As far as 7.6 working in it, that is questionable as I have had issues with the dongle in XP Mode. I had to reset the USB port every time I opened the virtual PC.

 

[signsbykacie]

I finally got it figured out. I had been reading online and every website said that you could not change the harware visualization to enabled in the bios, but I never actually checked. I got in the bios and I was able to turn on the hardware visualization. I put xp mode on the computer and was able to load flexi 7.6v2 on to xp mode no problems and printed great! Thank you for all the help!

 

[CS-SignSupply]

Good find. What brand and model of motherboard?