Fuji COLOR+ Inks

[RoCo]

Has anyone switched over from OEM to these inks for their UV flatbed? They're pushing a pretty fantastic deal to do the complete switchover, replace the ink I have in my shelves with theirs, re-profile all of my media, etc., etc., ....and if I'm not happy with the performance of their ink they'll return everything back to the condition it was in. Also, their price would save me $4-5000/year in ink costs.

Any opinions on it?

 

[National Sign Co. - Print]

We have been using for a couple years.

Well worth it!!!

 

[rfulford]

I run Fuji Sericol NH inks in my XL Jet and EF inks in my flatbed. Both perform great.

 

[Nicky Zhou]

Any replacement for the Oce flatbed printer inks...

 

[WYLDGFI]

I have NH on my 3360s and their inks on my Roland as well. Both with really good results. If I could go with my QS...Id consider the switch but not likely gonna happen. The support I get is really good and no complaints at all. I suggest profiling on your own end if you can....but their people are pretty good at the profiles as well.

 

[Deymos1981]

i use CI series on Arizona 350GT 4 years, all great. adhesion better than the native ink

 

[SignMeUpGraphics]

Deymos,

What is adhesion to glass like?
Our 360GT prints well to everything, but glass adhesion is where we would like better results.
Any help would be appreciated.

 

[Slimoff]

Deymos,

What is adhesion to glass like?
Our 360GT prints well to everything, but glass adhesion is where we would like better results.
Any help would be appreciated.

How do you prepare your glass?

 

[SignMeUpGraphics]

Clean with 99% isopropyl, apply 3M Primer 94 as per bulletin on media types, allow to dry, print.
It's better than printing purely on glass, but could still do with better adhesion.
We recently viewed some prints done with a SwissQ Impala and we could not remove the ink from the glass after printing.
Whatever their inks are made of, they adhere 100x stronger than the Sericol mix Océ is selling us.