BrianKE
New Member
I am doing a Gemini letter installation and a simple drawing showing how the letters are installed is required for the permit. Does anyone have one that they are willing to share? I know I can do this easily enough but just figured I would see if someone already had one done. Something like a cross section of the wall showing the studs, hole sizes, etc.
The letters I will be using are the acrylic with threaded rod and standoffs going into a cement block building.
The drawing DOES NOT need to be engineer stamped.
TIA
The letters I will be using are the acrylic with threaded rod and standoffs going into a cement block building.
The drawing DOES NOT need to be engineer stamped.
TIA