Graphtec CE5000-60 Repeat Function

[Sign-Man Signs]

Lost my manual on our Graphtec CE5000-60. Is there a repeat function? If so, can you share the pad function?

 

[ChicagoGraphics]

No matter what cutter your using the repeat fuction should be in your cutting software.

 

[Sign-Man Signs]

Huh yea. I mean from the control pad on the unit itself.

 

[Jackpine]

The manual is on the disks that came with the cutter in PDF format.

 

[thmooch]

1. Send the data to be copied to the cutting plotter, and cut or plot data once.

2. Use the (position-arrow) keys to move the pen to the starting position for cutting or plotting.

3. Press the "pause" key to switch to pause mode.

4. Press the "next" or "previous" key until the following menu is displayed. (copy)

5. Press the "enter" key to display the copy-setting menu.

6. Use the up/down arrow key to select the desired number of copies, then press the "next" or "prev." key.

7. The cutting/plotting operation starts for the number of copies selected.

8. To make further copies, replace the medium and repeat steps 2 to 6.

 

[Sign-Man Signs]

1. Send the data to be copied to the cutting plotter, and cut or plot data once.

2. Use the (position-arrow) keys to move the pen to the starting position for cutting or plotting.

3. Press the "pause" key to switch to pause mode.

4. Press the "next" or "previous" key until the following menu is displayed. (copy)

5. Press the "enter" key to display the copy-setting menu.

6. Use the up/down arrow key to select the desired number of copies, then press the "next" or "prev." key.

7. The cutting/plotting operation starts for the number of copies selected.

8. To make further copies, replace the medium and repeat steps 2 to 6.

Thank you. That's it.