artbot
New Member
Well this repair is getting worrisome. I really need any tidbit of advice or past observations on this one from current/past H700 users. There's no way where I am (shutdown for the year to reorganize) that I can switch printers or throw money at the current 1000lb paper weight. It simply has to work, not even well for my product. I can make product with one print head if I have to.
to summarize:
- printer working fine next day blank printing (no test print, no cleaning cycle jetting, no printing files, all heads all at once)
- board comm utilities in the "test printer" portion of the firmware check fine
- changed out the print head power board
- changed out the print head control board (D3 light not blinking)
- changed out the usb control board (D3 light comes on momentarily, then cuts off)
- tested continuity to J17 (runs between usb and print head control board for comm or something)
- waveforms have returned to default (analog 6pl) and will not accept sericol UV not matter what order of button clicking or restarting has been done (i've tried all 72 of them)
is there another board, a test, a parameter?
here's a link to the new 3d printed work:
http://alanalldredge.tumblr.com/
to summarize:
- printer working fine next day blank printing (no test print, no cleaning cycle jetting, no printing files, all heads all at once)
- board comm utilities in the "test printer" portion of the firmware check fine
- changed out the print head power board
- changed out the print head control board (D3 light not blinking)
- changed out the usb control board (D3 light comes on momentarily, then cuts off)
- tested continuity to J17 (runs between usb and print head control board for comm or something)
- waveforms have returned to default (analog 6pl) and will not accept sericol UV not matter what order of button clicking or restarting has been done (i've tried all 72 of them)
is there another board, a test, a parameter?
here's a link to the new 3d printed work:
http://alanalldredge.tumblr.com/