• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

heater temps for cjv30

ironchef

New Member
Good morning to all. Anyone mind telling me what settings they use for heaters on cjv30. For regular vinyl. Banner material? I got mine at 34. 37. 45
 

Neil

New Member
That's about right.
I think mine is 35 40 45.

Here's a tip if you want to turn off the heaters at will.
Switch to cut mode and press the heater/cutter button twice (then enter).

I found that because I drive this machine through Signlab, the heaters would fire up and stay on even in cut mode when I just want to cut something.
Being able to turn them off is handy. Pity you can't do the same override in print mode.
 

121a

New Member
Lately, we have been running hot. 45, 42, 50. Banner, and all other vinyl seem just fine with this temp setting.
 
Top