Hello im new here and have a problem

[mastiffdude]

Hi my name is Jim and ive been working in Graphic arts and signmaking for 40 years.Most of my work has been in offset printing and Giclee art reproduction.Im glad to see a site for people to exchange information on signmaking.I have a old Gerber 4A that i use sometimes for in house work.I use it seldom but i took it out of the closet last night to see if i could do a sign for my wife.It seems mice had been in the machine and i cleaned it up the best i could.I turned it on and the fan stared and then i got 3 beeps and nothing else.I then tried cleaning it better and removed and removed some of the IC chips and reseated them. I also broke a pin off one of the dip switch chips.Does anyone know how i can get this machine back up? and where could i get one of the chips? thanks for any help you can give Jim

 

[DesireeM]

I think it's probably impossible for anyone to diagnose all the problems without actually going and inspecting the machine. Your issue is pretty vague...You may be better off calling in a technician. Otherwise you might try a hundred different things and still not find the issue.

Did it give you an error code by any chance?

 

[mastiffdude]

No error code,

What im asking is, Do the three beeps indicate anyhthing?

 

[The Big Squeegee]

Welcome from OK

Howdy. This is the welcome forum of signs101. Try posting in the forum that deals with your problem.
:Welcome: to :signs101: