HELP just got new Flexi 7.6 and cutter wont cut

[Pairadice]

: I have had my cutter (Seiki 850H) for about 1 month and it came with FlexiStarter (what a waste) everything worked just fine. I just got FlexiSIGN Pro 7.6.1 today and installed it. The program works just fine but I went to cut and the model # 850H was no place. I tried all the other model #'s under Seiki and nothing. Is there a driver I need? Or did I just waste all the money I really didn't have anyway?

 

[Shovelhead]

You could try.........

in the setup "Hewlett-Packard" "HPGL" which
could work as a generic device.

 

[myronb]

Go here: http://www.scanvecamiable.com/ under support you can download the updates. You have to register but that's no big deal. I know the updates have additional drivers--I don't know if yours is in the list, but it's worth a try!

 

[Pairadice]

I will try to use that as a grneric device, Shovelhead, Thank you

myronb, I looked on the website but I couldn't find anything...maybe its there but listed under something else?

 

[Pairadice]

Well the HPGL didn't work either...

 

[dennis j]

There is an update for 7.6 v1 you can get it after you log as a user it is on the update page lower left scroll window.

 

[Pairadice]

There is an update for 7.6 v1 you can get it after you log as a user it is on the update page lower left scroll window.

Is "build731to766updater" what I want?

 

[dennis j]

Go to your Help and then About a window will open and tell you what which build you have.

 

[Pairadice]

My version says build 731

 

[dennis j]

That should be what you need.

 

[Pairadice]

Thanks everyone! I got it up and running