Help with Kickstand for 3ftx6ft Foamcore

[Andre Robinson]

Hello,

can anyone help me with making a Kickstand for a 3ft by 6ft piece of 3/16 Foamcore? I've printed 2 poster and will mount to 3x16 adhesive foamcore. (Tall Standing)

I have two sheets of 4ft x 6ft foamcore and the cardboard they were rapped in. So, each board will have a 2ft by 6ft offcut leftover [and still the cardboard wrapper] I have access to more cardboard. I just don't know what to do with it.

I have a Fletcher 3000 (up to 60 inches; I could score and cut) and a 4x8 table/mat/long rulers.

I could print and cut on top of a template if needed. (If someone has something I could use)

If I need to get something else, I'll get it. I also have a Home Depot, just in case. It's a short term throw away application, if that makes a difference.

Much appreciation,

Andre

 

[GAC05]

This might give you ideas on a DIY version:
https://www.affordabledisplayproducts.com/60-inch-easelback-for-large-displays-and-standees#

 

[Bly]

Message me if you want strut templates.
You can cut them by hand if you need to.

 

[FireSprint.com]

Here's a cut path for the feet that work for us! At Firesprint we make standees from heavier duty Gatorplast, we can also make them from corrugated plastic as well!

https://www.firesprint.com/high-definition-gatorplast-standee/

 

[Bly]

I'd probably use the double for something that size but either can be scaled to any size.

 

[Andy D]

I always use coroplast and just cut one "wall", nothing nearly as fancy
as what this guy has, but he does have a cool system.

 

[Andy D]

Instead of the braces cut into the coro, I would just
hand-cut the coro to shape, put velcro tabs on both sides and
give them a length of velcro so they can adjust how wide apart
they want the supports

 

[Andre Robinson]

Hey, thanks to you all. I like all of those ideas.