• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Hi Everyone... I have a simple question..

J

JoeR

New Member
I am making a canned sign and the front is 3/16" translucent white lexan i got from a sign supplier..off a roll...well its curled...like a bananna. which sided do i cut out? how do i get it flattened? what should i do? the sign face i am cutting is 32 x 72. Also...inside the sign which is LED lit...should I put supports for the face to keep it in place if it is pemanently bananna-ed? thanks for any help. Joe
 
J Hill Designs

J Hill Designs

New Member
Usually it says which side is toward the sun - usually the "outer" side of the bend ) <- but sometimes its rolled wrong...hangar bar shouldnt be needed if its only 32" tall, but if it goes the other way, yes...

welcome from cali :thumb:
 
Billct2

Billct2

Active Member
What they said...
It should be marked which side faces the sun.
Once it's in the cabinet it should stay flat.
 
You must log in or register to reply here.
Top