Question How can I change the ink Temperature on Oce Arizona?

[Chiki_20]

I have a OCE Arizona 350GT and I want to tray with others inks, but for these inks the temperature is high 48°C. I would need decrease the ink temperature. I have the SDS, but I canno´t found where I change it.
Someone knows how I can change?

Thanks

 

[Grizzly]

Will most likely require a service key. One of the reasons OCE bugs me. Limited control of the printer.

 

[SignMeUpGraphics]

5-1-13 maybe?

 

[NorthControl]

Hi Chiki,

I can tell you how. Please send me PM.

 

[Chiki_20]

Will most likely require a service key. One of the reasons OCE bugs me. Limited control of the printer.

I have already the service Dongle

 

[NorthControl]

No service key need.

 

[SignMeUpGraphics]

Is it not at option 5-1-13?

Documentation says:
5 - Inkbay
1 - Parameters
13 - Ink Temperature Setpoint

Default temperature is 47.0C.

 

[Chiki_20]

I have changed the option 5-1-13, but nothing happen.

 

[Deymos1981]

If still need.
1. Close Calgary and go to Windows. (you need to connect the keyboard)
2. button start / in the line "run" enter "regedit"
3. path hkey_local_machine/software/oce/aries/configuration/calgary_1/inkcontrol
4. On the right, find the line "temperature" and change it to the desired one.

 

[NorthControl]

Yes, but be careful with reference temp. It will modificate the head voltage too. The best if you set the ref. Voltages too, and sincronise the ink type too. ...