how do i cross cut automaticly?

[kustomsigns&designs]

i know theres got to be a setting to auto cross cut after every job right? i just can't figue out how, anybody know?

also i am using flexi 7.5 and can't figue it out there either.

 

[woolly]

its a option in the graphtec windows driver and i think in the controller so should be in flexy. er somewhere

woolly

 

[Shovelhead]

I'd like to know that also.

 

[chopper]

if by cross cut you mean it will cut the sheet off the sheet at the end of the job...
that will be done in the software if you do not have a high enough version it will not work, ( I know that you have flexi) I have sign lab and it wasn't available till version 7.1 rev9 or 10 it will be an option in the cutter setup to auto cut after each job, I have it in sign lab 8 works great... you should ask for a demo of sign lab 8 the photo editing is worth the switch alone!!
//chopper

 

[kustomsigns&designs]

yes by cross cut i mean sheet cut. on the cutter it is called cross cut.

 

[PMG]

On my Fc 7000-130,to do a cross cut ...on the plotter its self hit menu / next /then choose cross cut.

 

[kustomsigns&designs]

yeah me too, but i want to cut 36 different 10 foot panels overnight and have them all cross cut/sheet cut.

 

[PMG]

Got yah..... here is your answer LOL in PM go to Graphtec properties .here is a pic,as you see i have mine turned off.Hope that helped

 

[kustomsigns&designs]

i dont see that option

 

[PMG]

after you open default job properties at the bottom there is a button called cutter options (see Pic below) open that up and go to after job.

 

[kustomsigns&designs]

graphtec properties that is

 

[PMG]

In Production Manager (PM) Right click on your plotter and go to default properties .

 

[kustomsigns&designs]

the the cutter have auto option?