How to connect SC-540 to Versaworks 4.1? PT2

[julioramos]

Hi partners!

i Buy a Roland SC-540 with any software ... A Friend give me a copy of versaworks (have a xc-540) i upgrade de firmware and upgrade the version versawork to 4.1 and the same advice: "Cannot find information for the device detected. Please make sure the software supports this device"

You can help me???
Any Free Solution?????

 

[Andrew O]

Since the SC-540 was introduced before VersaWorks, it will require a dongle to use it. Your local dealer in the Dominican Republic should be able to help. Unfortunately, there is no free solution.

 

[julioramos]

My Local Dealer knows nothing about the dongle :S

 

[Andrew O]

I'm sorry your dealer wasn't able to help. You can always feel free to give us a call at (949) 727-2100 and press '2' for support. If you want to send me a PM with your contact information, I can also get you directly in touch with our regional manager for your country.

 

[julioramos]

Ok now i have Color Rip 2.1 the question is: That program Works on Windows 7????

 

[Andrew O]

Colorip will not run on Windows 7. It was an OEM Wasatch product, and they have newer versions of similar products that will run on Windows 7, but they are not zero cost. If you are familiar with the Colorip a newer Wasatch RIP may be a good option.

At this point, you will have to invest in a RIP if you want to run on Windows 7. A dongled version of VersaWorks would ensure free upgrades moving forward, but there are other choices to drive your printer.

 

[julioramos]

Thnks... Still with XP