How to make the inside of a word look like a picture

[PurplePanther]

We have Omega version 2.02
I am trying to put a background image inside of some text
and print on the gerber. The image also has to print on clear vinyl (reversed)

How would I go about doing this? I know you can use the
Power Clip tool in Corel, but is there such a feature in Omega??

I know under TOOLS you can do some things with DISTORTION but I don't
think this can be done with this method.

I would assume you would make the wording change to curves.

Any help would be greatly appreciated!!!!

Brent

 

[Fred Weiss]

It's really much easier than all that.

• Open your image in a workspace.
• Set your text with no fill or stroke
• Assign both the image and the text to be on clear vinyl
• Press F8 to preview the job
• Output to GSPPlot
• In GSPPlot open the 123 dialog and assign a "basecoat white" and reverse the print order
• In GSPPlot reverse the image

You should be good to go. there are other ways to do this but this is the easiest.